1.Cut off the bottom edge of a shrink wrap bag with a heat sealer. When you look at shrink wrap bags, you’ll notice that the bottom edge is already sealed. Right next to the seam is a strip of excess plastic. Use your heat sealer to cut this bottom edge off. To use a heat sealer:[1]

Plug in and turn on your heat sealer.Open the heat sealer and place the bag between the blades.

The primary difference between these two types of Stretch Wrap Film is the process in which they are created and manufactured. These differences also make a big impact on the usability and price of the film.

The cast process beings the same as blown, with beads of resin being fed into a heated barrel and being forced through a narrow slotted die.

shrink wrapping products used to protect and/or compartmentalize structures after natural disasters (such as hurricanes) or while remediation/disaster restoration work is being done. Shrink wrap can be used to easily cover entire buildings, roofs, or other specific areas that are damaged. premium shrink wrap shrinks “drum-tight” and is far more effective than traditional tarps and sheeting.

Our durable, weatherproof covering creates a proper enclosure and protects the project from further or potential damage.

The actual type of machine stretch film you use for the job is as important as the machine. Because of this, properly wrapping a pallet is a more significant and tedious task than it can originally seem. In general, there are two different types of stretch wrapping machines:

Power pre-stretch machines need to use the standard unstretched film